TBi Robotic Torch Neck (Swan Neck) RM82W-45° Water Cooled | 673P001023

Product Description: Code 673P001023 TBi RM82W-45° Robotic Torch Neck (Swan Neck), Developed for heavy industry and high-amperage (heavy duty) welding operations, it is a top-segment component that supports the "Zero Downtime" goal in robotic automation with its patented cooling technology and rigid housing structure.

⚠️ Engineering Detail: Why “Dual Channel” Cooling?
In standard torch necks, water enters through one channel and exits through another. In the TBI RM82W, however, water circulation... Dual Circuit It has a special architecture. Cold water reaches the contact nozzle holder at the very end of the neck, instantly absorbing heat by maximizing the surface area.

• Thermal Stability: Bu üstün soğutma, kontak memenin aşırı ısınarak yumuşamasını engeller. Sonuç: Telin meme içinde sıkışması (Burn-back) tarih olur ve sarf malzeme ömrü %100’e kadar artar.

• TCP Guarantee (Inflexibility): The outer casing of the neck is made of a special stainless steel/brass alloy that does not flex upon impact. Even if the robot hits something, the neck will not bend, and the TCP (Tool Center Point) will not shift. You will not have to reprogram the robot.

• Conductivity: Its large cross-sectional area allows it to transmit currents of 500 Amperes and above without resistance (without overheating).

Technical Advantages:

• Quick-Change: Thanks to its modular design integrated into the torch body, the neck can be replaced in seconds without having to disassemble the main cable bundle when maintenance is required.

• 45° Standard Angle: The 45-degree angle, most preferred in robotic welding, provides optimum access for both straight seams and fillet welds.

• No Breakage Problem: Thanks to its monolithic and reinforced structure, it does not experience problems such as "breaking at the bottom" or "leaking" that are common in standard necks on the market.

Compatibility: This product; TBI RM2 82W serisi su soğutmalı robotik torç gövdeleri ve tüm standart TBi RM2 sarf malzemeleri (Nozul, Meme Tutucu) ile %100 uyumludur.

Frequently Asked Questions:

1. What is TCP loss and how does this product prevent it?
TCP loss is the bending of the torch neck, even by millimeters, after a collision; in this case, the robot welds in the wrong place. The rigid structure of the TBi RM82W does not flex, so even after a collision, the robot continues welding from the same point.

2. Can I use this neckpiece in an air-cooled system?
No. This product (82W) is for water-cooled systems only. For air-cooled systems, please see our RM 72G series necks.

3. At what amperage does it operate?
Karışım gaz (Mixed Gas) ile %100 devrede (Duty Cycle) 500 Amper’e kadar sorunsuz çalışır. Ağır sanayi için tasarlanmıştır.